Alltec Inc

91


Alltec Inc
Alltec Inc is listed in the Bathroom Remodeling category in Whippany, New Jersey. Displayed below are the social networks for Alltec Inc which include a Facebook page, a Google Plus page and a YouTube channel. The activity and popularity of Alltec Inc on these social networks gives it a ZapScore of 91.

Contact information for Alltec Inc is:
23 Jeffrie Trl
Whippany, NJ 07981
(973) 884-4477
Do you own or manage this business? Click here to claim the Alltec Inc listing and add social networks, logos, descriptions and more.

Alltec Inc Contact Information:

Social Posts for Alltec Inc

FOBA Laser Marking + Engraving added an event.
Chose your favorite date and place: Boston/Tewksbury – April 20, 2017 Charlotte – April 27, 2017 Chicago/Wood Dale – May 04, 2017 More information coming soon

Code Validation on Brake Pad FOBA vision system validates the part, measures part position and orientation, aligns the mark relative to the part position and applies the 2D code correctly. Directly after marking, the code is validated. Benefit: Reduced cycle time, less part handling with in-laser code-validation, cost savings. http://bit.ly/2mXzRlG
FOBA vision system validates the part, measures part position and orientation, aligns the mark relative to the part position and applies the 2D code correctl...

FOBA Laser Marking + Engraving shared MEDTEC Europe's photo.
Our laser marking expert Dr. Faycal Benayad-Cherif speaks on April 6, 1:30 pm at MEDTEC Europe #MedtecEU
The Challenges and Solutions of UDI Marking for Medical Devices! Register now and hear FOBA’s Faycal Benayad-Cherif share his insights http://ubm.medteceurope.com/registration-information/

FOBA Laser Marking + Engraving added an event.
European event for medical component and service providers Messehighlight: FOBA präsentiert die neue Faserlaser-Generation zum Markieren von Kunststoffen. Halle 3/Stand C20 FOBA präsentiert sich bei folgenden Medtec Talks: 1. "Direct Part Marking von chirurgischen Instrumenten - Technische Lösungen für den Laserbeschriftungsprozess" 04.04.2017 10:00 -11:45, Region Stuttgart Lounge (Eingangsbereich Ost der Messe Stuttgart) Christian Söhner Anmeldung unter: http://bit.ly/2m9ssmZ 2. "UDI Kennzeichnung von Medizinprodukten mittels kameragestützter Lasertechnologie" 05.04.2017 12:00 – 12:30 VDMA Exhibitor Forum, Halle 3/Stand D28 Christian Söhner, Dr. Mareike Kiel Teilnahme kostenlos – einfach vorbeikommen 3. "UDI Marking for Medical Devices: Challenges and Solution" 06.04.2017 13:30 – 14:00 Medtec Insights Theatre | Regulatory II | Hall 1 | Stand 1D51 Dr. Faycal Benayad-Cherif Teilnahme kostenlos

FOBA Laser Marking + Engraving added 7 new photos.
Application of the Month March 2017 Electronic parts – Traceability in detail Electronic parts and products get identification marks to allow for correct allocation during complex production processes, for safety reasons in case of breakdown, for tracking and registration of inventory, as a prevention against forgery as well as to ensure traceability throughout the complete value chain. Areas of only few square millimeters, e.g. on SMD-components or micro-chips, need to be marked with comprehensive contents in the form of 2D-matrix-codes, alphanumeric characters, logos etc. Even items which are sealed by solder resistant coatings need to be marked with traceability codes. Ceramics, plastics, metals or alloys used in electronic industry get laser marked in high quality and long term legibility by using fiber, CO2- or UV-laser systems. FOBA’s continuous wave fiber laser markers have been primarily designed to mark molded housings or circuit boards has the ability to achieve line widths well below 30 µm and character heights of less than 150 µm.