Analytichem LLC

36
Analytichem LLC
Analytichem LLC is listed in the Laboratories Analytical & Testing category in Luxemburg, Wisconsin. Displayed below is the only current social network for Analytichem LLC which at this time includes a Facebook page. The activity and popularity of Analytichem LLC on this social network gives it a ZapScore of 36.

Contact information for Analytichem LLC is:
N9190 Bay Meadows Ln
Luxemburg, WI 54217
(920) 866-3944

"Analytichem LLC" - Social Networks

Click to visit the social networks of Analytichem LLC:
36
Analytichem LLC has an overall ZapScore of 36. This means that Analytichem LLC has a higher ZapScore than 36% of all businesses on Zappenin. For reference, the median ZapScore for a business in Luxemburg, Wisconsin is 37 and in the Laboratories Analytical & Testing category is 34. Learn more about ZapScore.

Do you own or manage this business? Click here to claim the Analytichem LLC listing and add social networks, logos, descriptions and more.

Analytichem LLC Contact Information:

  • N9190 Bay Meadows Ln
    Luxemburg, WI 54217
  • Map
  • Phone: (920) 866-3944
Social Posts for Analytichem LLC

2017 Pricing.




Is the water at your beach or pond safe to swim in? Request MPN bacteria($30) and we can let you know if it is below the 235 CFU E. Coli safety limit. Have a happy and safe 4th. Following is the EPA recommended sampling procedure. 4.To collect the surface water samples, carefully move to the first sampling location. If wading in the water, try to avoid kicking up bottom material at the sampling station. The sampler should be positioned downstream of any water current to take the sample from the incoming flow. 5.Open a sampling bottle and grasp it at the base with one hand and plunge the bottle mouth downward into the water to avoid introducing surface scum. Position the mouth of the bottle into the current away from the hand of the sampler and away from the side of the sampling platform or boat. The sampling depth should be 15 to 30 centimeters (6 to 12 inches) below the water surface, depending on the depth from which the sample must be taken. If the waterbody is static, an artificial current can be created by moving the bottle horizontally with the direction of the bottle pointed away from the sampler. Tip the bottle slightly upward to allow air to exit and the bottle to fill. 6.Remove the bottle from the waterbody. 7.Pour out a small portion of the sample to allow an air space of 2.5 centimeters (1 inch) above each sample for proper mixing of the sample before analysis. 8.Tightly close the cap and label the bottle and deliver to the laboratory same day.